Smartline ST700 Flush Mount Pressure Transmitter for direct insertion in processes with the use of a 1” sleeve, welded into the process line. It is primarily used for pressure measurement in the head box of pulp and paper plants.
The Flush Mount Pressure Transmitter, is available in ranges from 0-1 to 0-100 psig and can be installed in a variety of hazardous locations. The flush mounting capability eliminates the possibility of clogging while the insertion design makes the transmitter change out rapid and trouble-free.
The cost-effective transmitter provides:
| Overview | |
|---|---|
| Models | STG73P |
| Environmental Conditions | |
| Maximum Allowable Working Pressure (MAWP) | 100 psi (7.0 bar) |
| Ambient Temperature Limits | -15 to +65 deg C (Operating), -55 to +75 deg C (Storage) |
| Relative Humidity | 0 to 100% RH |
| Measurement Type | Flush Mount Gauge Pressure |
| Rangeability | Up to 100:1 |
| Stability | Up to 0.020% of URL per year for 10 years |
| Communication Interfaces | |
| Process Interface Temp. | -15 to +95 deg C (max) |
| I/O Capabilities | |
| Process Connection Type | Flush mount in 1 in sleeve with O-ring and locking bolt |
| Marine Certification | ABS, BV, DNV, KR, LR |
| Response Time | As fast as 100 ms millisecond |
| Configuration | External Zero, Span, & Configuration Capability; Two or Three-Button Local Configuration |
| Processing & Performance Metrics | |
| Maximum Turndown Ratio | 100:1 |
| Accuracy | Up to 0.065% of span (standard), 0.04% (optional) |
| Communication & Protocols | |
| Output/Communications | 4 to 20 mA, Honeywell DE, HART (v7.0) |
| Functional & Control Features | |
| Sensor Technology | Piezoresistive sensor with on-chip temperature compensation |
| Diagnostics | Comprehensive on-board diagnostics, critical/non-critical, SIL 2/3 certified |
| Mechanical & Physical Properties | |
| Wetted Materials | Diaphragm: Hastelloy C-276 Meter Body: 316L Stainless Steel |
| Standards & Certifications | |
| Safety Approvals | SIL 2/3 certified, Dual Seal design, NAMUR NE-43 compliance, World class overpressure protection |
| Approvals | FM, CSA, ATEX, IECEx, NEPSI, KOSHA, EAC, CCoE, UATR, SAEx, INMETRO, Marine (ABS, BV, DNV, KR, LR), IEC 61508 SIL 2/3 |
| Technical Specifications | |
| Display Options | Modular LCD (Alphanumeric or Advanced Graphics), Multiple screens, Configurable units |
| Supply Voltage | DE: 15 to 49.3 VDC HART: 10.8 to 42.4 VDC |
| Pressure Range | LRL: -14.7 psi (-1.0 bar) Min Span: 1 psi (0.07 bar) STG73P: 100 psi (7.0 bar) |
| Wiring | Up to 16 AWG (1.5 mm diameter) |
| Models | STG73P |
|---|
